Oase Hollow Single Jet Nozzles. Oase nozzles HS 70/3,5 E, HS 100/4,5 E, HS 130/10 E
The
OASE hollow jet nozzles are special nozzles that are used to achieve greater
fountain heights.
As opposed to full stream nozzles, the water requirement, or stream volume, is reduced. The precise construction of the ring slit guarantees a stable fountain jet.
The HS 70/3,5 E version produces a hollow jet with an external diameter of 70 mm and a water film thickness of 3,5 mm.
The HS 100/4,5 E hollow jet has an external diameter of 100 mm and water film thickness of 4,5 mm.
The external diameter of the HS 130/10 E jet is 130 mm and the water film is 10mm thick.
Oase
Hollow Single Jet Nozzles are...
- Clear, wind stable, and full stream jet
- Independent from the water level
- With flow regulator
- For greater fountain heights
Key to the Oase Hollow Nozzle Specification table below...
| FH: Fountain Height (metres) | DWB: Nozzle Water Demand (Litres per minute) |
DDB: Nozzle Pressure Demand (Metre head, Bar) |
| MA: Material | GW: Weight |
Click the small image to enlarge...
