Oase Vulkan MultiJet Fountain Nozzles: Vulkan Fountain Nozzle Models 37-2 K to 300/19-8 T
The OASE Vulkan multi jet nozzles create a beam of jets that cascade at different heights. The single jets are glass clear and relatively wind stable.
The fountain height of the Vulkan 19-3 T and 19-43 T jets can, by means of an in-built throttle, be smoothly adjusted without steps. For the 37-2 K, 200/19-6 T and 300/19-8 T jet height the correct throttle setting must be adjusted when installing. These last types are equipped with nozzles from the Komet range which allows for individual jet adjustment. For cleaning, the upper parts can be unscrewed.
See the detailed sketch below
Oase Vulkan Multi Jet Fountain Nozzles are...
- Precise, full stream
- Independent from the water level
- Multi-stepped water pattern
- Easy to clean
Note: All movable Komet Nozzles (used in Vulkan 200 und Vulkan 300) allow for an inclination of 12° from vertical!
Specifications for Oase Multi Jet Vulkan Nozzles
Key to the Vulkan Nozzle Specification table below...
| FH: Fountain Height (metres) | DWB: Nozzle Water Demand (Litres per minute) |
DDB: Nozzle Pressure Demand (Metre head, Bar) |
| MA: Material | GW: Weight | DSD: Nozzle Spray Diameter (Metres) |
Click small image to enlarge
