Oase Half Inch Plastic Fountain Nozzles
Oase produce a beautiful range of engineered plastic water nozzles for use in ponds and water features.
How to Choose the Right Nozzle and Pump
When choosing a nozzle the final effect will depend upon the pump used. In general the higher the outlet pressure form the pump the higher and wider the fountain will be. Normal submersible pond pumps with a capacity of between 1000 and 4000 litres per hour will power these nozzles.
There are 4 main nozzle types... Calyx, Lava (or Bell), foam jet and tiered Vulkan jets.
 |
 |
 |
 |
| Lava or Bell Jet Nozzle | Calix Flower Fountain | Foam jet Nozzle | Vulkan31-1.5K Nozzle |
The diameter of the fountain effect if on importance when placing into a water feature where the diameter is on the smaller side since the wind effect will tend to blow water out of the water feature. Flow can be adjusted on some of the models.
These models are all 1/2" fittings.
The table below shows the range of diameter of jet effect based upon the type of pump used in the fountain system.
|
Jet Name |
Calix 20-5K
|
Lava 20-5K
|
Lava 36-10K
|
Foam jet 22-5K 
|
vulkan 31-1.5K
|
|
Pump Suggested |
Ø cm H cm |
Ø cm H cm |
Ø cm H cm |
Ø cm H cm |
Ø cm H cm |
|
Neptun 1000 |
30 - |
35 - |
-- |
-- |
40 - 65 |
|
Neptun 1500 |
55 - |
45 - |
-- |
-30 |
60 -110 |
|
Neptun 2000 |
75 - |
55 - |
-- |
-45 |
85 - 145 |
|
Neptun 3000 |
95 - |
60 - |
-- |
-50 |
100 - 155 |
|
Neptun 4000 |
110 - |
70 - |
-- |
-65 |
110 - 165 |
|
Neptun 5000 |
-- |
-- |
90 - |
-- |
-- |
|
Neptun 6000 |
-- |
-- |
90 - |
-- |
-- |
|
Neptun 9000 |
-- |
-- |
90 - |
-- |
-- |
|
Neptun 12000 |
-- |
-- |
100 - |
-- |
-- |
|
MA |
plastic |
plastic |
plastic |
plastic |
plastic |
|
GW |
0.1kg |
0.1kg |
0.2kg |
0.1kg |
0.1kg |